If you would like your advertising to be visible not only during the day but also at night, it is worth
it is worth considering a reflective banner. Reflective banners, also known as prism banners
called, resemble standard banners and are made of a special PVC-coated
Fabric printed. Reflective banners are made of a special coating consisting of
reflective material, clearly visible at night. During the day, reflective banners can be seen from the
Ferne looks like a normal banner. Only upon closer inspection can one recognise the honeycomb-like structure.
of the materials.

Even complex graphics such as photos or colour gradients can be printed on reflective banners.
be printed in full colour, but bear in mind that the print resolution may be limited due to the structure.
is slightly lower than for standard material. To fully utilise the advantages of reflective material
However, it is worth simplifying the message. Large, clear letters and
Simplified graphics in high-contrast colours are easiest to read. It should be noted that a
reflective banners are not a cheaper equivalent to illuminated signs, although they are
can have a similar function in certain circumstances.

• • They do not rust when exposed to outdoor conditions.
  • Practically invisible, they help to improve the appearance of banners.
  • Does not contain heavy metals or anti-corrosive substances
  • PVC-free
  • UV-resistant
  • Resistant to low temperatures

Thanks to the use of plastic eyelets, our PP and PE banners and mesh nets are
Waste stream fully recyclable.
Certified by AIMPLAS (Centre for Plastics Technology) Project No. PRO08-0184.

During tensile strength tests, the banner always tears, not
ÖSEN!

Large-format banners and mesh nets can be installed using lifting equipment or climbers.
werden. As the advertising space is usually located on tall buildings, we require some
Information needed to quote a price, such as B.: Size, type of installation, location. After sending
this data to the email address sebastian@print.gg, we will send you an offer you cannot refuse.
can refuse.

The edges of the banners are sealed by rolling and welding with hot air using Leister-
Welding machines completed. Large-format banners are printed on trouser legs and
connected by hot welding of the panels.
For our banners and mesh nets, we use transparent meshes that are manufactured using advanced
Techno-Polymer technology. This prevents them from rusting and maintains their transparency.
makes it almost invisible.

The banners are packed in sturdy corrugated cardboard boxes. Banners over 1.2 m wide will be converted into a
Folded cube, while banners less than 1.2 m wide are rolled up.